Your shopping cart is empty

Honda Civic 1999 - D14Z1

The engine bay Time-Attack Circuit Park Zandvoort march 2010 (6th place in semi-pro) Time-Attack Circuit Park Zandvoort march 2010 (6th place in semi-pro) Getting ready for action Time-Attack Circuit Park Zandvoort march 2010 (6th place in semi-pro) Time-Attack Circuit Park Zandvoort march 2010 (6th place in semi-pro) The Twinloop muffler and Advan A048 semi-slicks Time-Attack Circuit Park Zandvoort march 2010 (6th place in semi-pro) valve springs with retainer milled head with the new valves Jenvey throttle bodies setting up Jenvey intake setting up Jenvey intake The turbo Result from the dyno

OMI products

  • OMI-Performance high compression valves
  • OMI-Performance SPEC1 valve springs
  • OMI-Performance titanium retainers
  • OMI-Performance SPEC SR coilover prototype kit

Drivetrain

Engine type: D14Z1
Displacement: 1396cc
Compression ratio: ~9.5:1
Boost: 6 psi / 0.4 bar
Bore & stroke: 75mm x 79mm
Max horsepower: 203.1hp @ 6965rpm
Max torque: 206.5Nm @ 6815rpm
Weight: ~920kg without driver
Intake: Jenvey individual throttle bodies 42mm
Jenvey airbox
Cylinder head: milled, 3-angle valve job, phosphorus bronze valve guides
Valves: OMI-Performance high compression valves
Valvesprings: OMI-Performance SPEC1 valvesprings
Retainers: OMI-Performance titanium retainers
Camshaft(s): regrinded D14 cam by NEWMAN
Camgear(s): HKS camgear
Pistons: stock
Connecting rods: stock
Crankshaft: stock
Turbo: Honeywell-Garret TB3402
.60 compressor wheel trim
.48 A/R compressor
.58 A/R turbine
Water- and oilcooled
Intercooler: 680mm*480mm*180mm
Header: Custom made by Yahoon's weldings production
Exhaust: 2,5" downpipe
custom 2,5" stainless steel exhaust line, no cat and mufflers
Transmission: Honda D13 S20 gearbox
Clutch: Fidanza 6 puck
Flywheel: F1 racing aluminium
ECU: P06 OBD1 with NEPTUNE management
Other: Bosch 440cc fuel injectors
Setrab oil cooler
HEL performance clutchline
Mercedes 12v vacuum pump for brake booster
OMP 6-point collcage

Suspension

  • OMI-Performance SPEC SR coilovers prototype kit
  • Ultra Racing 3-point front upper strutbar
  • Ultra Racing side floor bars
  • Ultra Racing fender braces
  • original Honda VTI 16mm swaybar rear
  • Megan Racing H-brace
  • Energy Suspension polyurethane rear trailer arm bushings
  • Beaks reinforcement kit
  • Beaks tie-bar
  • Megan control arms rear
  • Buddyclub P1 camber kit rear

Brakes

  • Front: Brembo MAX brake discs 260mm with Ferodo DS2500 Racing brake pads
  • Rear: brake discs 240mm with Ferodo brake pads
  • Valvoline DOT5.1
  • Honda ITR 1" master brake cilinder
  • Goodridge stainless steel brake lines

Wheels & Tyres

  • 16" white DTM wheels ET45 4*100 (daily)
  • Yokohama Advan Neova 205/45/16 or Roadstone N2000 195/50/16
  • 15" gunmetal painted wheels 6.5J ET35 4*100 (track)
  • Yokohama Advan A048 195/55/15 circuit usage only

Exterior

  • Honda Type-R window visors
  • Honda Sport rearlip
  • Honda Type-R wing
  • Honda Type-R grill
  • Honda Type-R emblem
  • DIY Type-R look headlights
  • Tsunami frontlip
  • Canards on the front bumper
  • Difussor rear

Interior

  • Bride Low Max seats
  • QSP 3" seatbelts
  • Sparco carbon pedals
  • Cleaned empty trunk
  • LTEC steering wheel
  • APE:garage: X-bar
  • Innovate wideband + standalone gauge kit
  • Tunerview II